Best Sellers
-
Price €45.00
Chronelec Protime LS...
Price €157.50Chronelec Protime...
Price €200.00
Subcategories
Active filters
ALGE WTN-WS WTN for...
With the WTN-WS device you can connect the WS2 and a display board to the Timy3.
Hanhart Crown Stopper
All models have a diamond-cut, chrome-plated and polished brass case. All models are protected against shock, dust and water.These models have additional case seals to give extra protection. Technical details: Pin lever, 7 jewels1/5 sec. 30 min.Case 55 mm, weight 120 g
Hanhart Crown Stopper...
As well as its stopwatches in metal cases, Hanhart also offers more inexpensive crown stoppers in functional ABS plastic cases with pendant ring. Very lightweight and easy to handle. Technical Details: Pin lever, 7 jewel 1/5 sec. 30 min. Case 55 mm, weight 80 g
TAG HEUER photocell...
TAG Heuer HL 2-35 Set without transport case SECOND HAND Good condition
Hanhart Stratos 2...
Stratos is a functional stopwatch with a robust ABS case. Measuring range: 1/100 sec.LCD display: 7-digitNumeral height: 6.5 mmDisplay range: 9 hrs., 59 min., 59.99 sec.Size: 66 x 70 x 21 mmWeight: approx. 62 gBattery: button cell SR 54Battery life: approx. 2 years Functions: Start/Stop/Reset Addition/Split/Dual measurement
Décodeur Chronelec RF...
The RF Elite decoder is recommended for sports such as cycling, triathlon but also motorized sports with moderate speeds (less than 200 km/h) such as Rally, Enduro, Motocross, Kartcross etc... A ground loop activates the RF-I transponder, then the RF Elite decoder receives the transponder information by radio. Radio communication uses a robust protocol...
ALGE bs-r250 ballspeed
display board with 250 mm figure height The ballspeed BS-R is used to measure the speed of balls for different sports. It can measure the speed of objects up to 186 mph, even if the radar sensor is placed behind a goal net. The ballspeed system BS-R consists of display board with three red LED digits, 250 mm figure height radar sensor two tripods...
"Red Fat Jack" Manual...
Giant Manual Contactor with spring-loaded mushroom button. Diameter 95mm 2 Jack inputs/outputs 3.5m (connection of an additional contactor) 1 input/output "banana" plug 4mm Supplied with jack cord for Chronelec decoder connection
ALGE Selftimer Display...
6-digit LED display board for selftimer SF3 with 250 mm figure height
ALGE ASC3-RCU Remote...
Remote control ASC3-RCU for ASC3 with 10 m cable length to operate the startclock