The myWER VERO RLT is a multifunction wireless driver display. Race information is sent by a radio transmitter controlled by the timing software, so no onboard sensor or GPS is required. The CC version is powered directly by a compatible vehicle alternator or battery.
Compact and easy to install, it suits karting, mini bikes, motorcycles and cars. Fit it with the supplied mount, connect the power source and the display is ready to use.
For use in Europe only due to radio-frequency restrictions. A compatible radio transmitter and timing software are required and are not included.
| Function | VERO RLT R1 CC | VERO RLT P1 CC |
|---|---|---|
| Race position | ✓ | ✓ |
| Race lap number | ✓ | ✓ |
| Lap time | ✓ | ✓ |
| Difference from previous lap | ✓ | ✓ |
| Gap to race leader | ✓ | ✓ |
| Gap to preceding competitor | ✓ | ✓ |
| Information zoom | ✓ | ✓ |
| Setup menu | ✓ | ✓ |
| Performance indicator LED | ✓ | ✓ |
| Race flags | — | ✓ |
| Race text messages | — | ✓ |
| High-brightness LEDs | Green + red | Green + red + RGB |
| myWER price | 194 € HT / 232,80 € TTC | 224 € HT / 268,80 € TTC |
| Display | LCD 128 × 64 pixels, backlit |
|---|---|
| Power supply | Vehicle alternator or battery |
| Operating voltage | 12–42 V AC/DC |
| Consumption | 30 mA max. |
| Power on / off | Automatic or manual |
| Receiving frequency | 869.5 MHz |
| Range | Up to 500 m line of sight |
| Dimensions | 101 × 84 × 23 mm |
| Weight | 150 g |
| Housing | ABS, scratch-resistant UV-resistant lens |
| Operating temperature | 0–55 °C |
| Protection | Splash resistant, not waterproof |
| Mounting | Dedicated mount included |
| Warranty | 24 months, wiring excluded |